KeyAT Keyboard Port Adapter
5/19/2007
4
L3 Systems
Jumpers and Switches
K2 - RS232/RS485 Jumper
K2 Selects between an RS232 and an RS485 interface.
K3 – 5 Volt From DB-25 RS-232 Connector
K3 connects DB-25 Pin 9 to 5 volts. This can be used to power
KeyAT from DB-25 connector.
Warning: This is not normally
connected. If 5V power is connected to PC, then damage
can can occur if also connected to external supply!
KeyAT Keyboard & PC Mini-DIN Connector
The following connector shows the pin definitions for the two 6
pin Min-DIN connectors. If the application is an RS-232
keyboard, the computer Mini-DIN connector can be used to
provide 5 volts power.
+5V
Pin 4
GND
Pin 3
CLOCK
Pin 5
Male “cable” connector
DATA
Pin 1
1
2
3
4
5
6
1
2
3
4
5
6
CLOCK
Pin 5
GND
Pin 3
DATA
Pin 1
+5V
Pin 4
KeyRF 6 PIN
Mini-DIN
Connector
Female “panel” connector
Summary of Contents for KeyAT
