Check agitator wire on a daily basis. If wire is not present, product will run the risk of
building up prior to reaching hopper door and not spreading evenly.
SECTION 4
Z-SPRAY OPERATIONS
4.1 Operations
Upon turning the key on to start the unit, apply full choke. Once unit has started, release
first the choke and then the brake. Push Joy Sticks forward (equally) to have the unit
move straight. Should you want to unit to backup in the reverse direction, pull back on
the Joy Sticks. If a turn is desired, push opposite Joy Stick of the direction you want the
unit to head forward (if wanting to turn left, push the right lever forward while keeping
the left lever slightly back of the right thus allowing the right tire to turn more than the
left. Push more on the left lever if you desire to turn the unit to the right). Be cautious as
turn radiuses change with the speed you are going and the amount each Joy Stick is
positioned forward or backward positions.
4.2 SPRAYING OPERATIONS
The spray system has the ability to spray in 4 different spray patterns. The wing
booms (left or right) each have their own nozzles creating a 48” liquid path on either side.
The middle boom is equipped with a single nozzle covering a 48” middle pattern
(NEVER SPRAY WILL ALL 3 DIRECTO VALVES IN THE ON POSITION)
.
Using both the left
AND
the right Directo Valves (
pictured # 1
), the unit is spraying 8’
wide. If
JUST
the middle Directo Valve is on (
picture # 2
), the unit is spraying 4’ wide
directly in the middle. If an operator needs to spray 4’ wide and offset the pattern, use
EITHER
the left nozzle (
picture # 3
) or the right nozzle (
picture # 4
) depending on
what side of an offset you are attempting to accomplish.
(picture # 1)
(picture # 2)
(picture # 3)
(picture # 4)
Page 7
Summary of Contents for Z-Spray JR36R
Page 1: ...OWNERS MANUAL JR36R ZS 3620R Z Spray ...
Page 2: ......
Page 24: ...Honda Engine Wiring Harness Schematics Page 21 ...
