USB to RS-422 / RS-485 Adapter
In this case, the entry is 1027_24592, which corresponds to a VID of 0x0403 (1027) and a PID of 0x6010
(24592) device. If this is not the device to be installed, the message will recur.
To solve the problem, the INF files must be edited to accommodate the required VID and PID. For the
D2XX drivers, edit the bold red entries in the following line in the ftd2xx.inf file:
[FtdiHw]
"FTDI Dual device"=FTDI,USB\&VID_0403&PID_6010
For the VCP drivers, edit the bold red entries in the following line in the FTDIPORT.inf:
[FtdiHw]
%VID_0403&PID_6010.DeviceDesc%=FtdiPort232,FTDIBUS\COMPORT&VID_0403&PID_6010
5. Device can write but cannot read
If the hardware does not work correctly under Windows 2000 or Windows XP then the problem is most
likely a hardware issue. Windows CE is not very tolerant of noisy hardware, so even "good" designs for
35
