![background image](http://html1.mh-extra.com/html/l-b-white/premier-ts080/premier-ts080_owners-manual-and-instructions_664836013.webp)
L.P. GAS SUPPLY
DUCT
(NORMAL EXTENDED
LENGTH IS 3.6 METERS)
TENT DRAPED
OVER DIFFUSER
TENT SIDE WALL
OPTIONAL
AIR DIFFUSER
MINIMUM SAFE DISTANCE
FROM LP CYLINDER TO HEATER
IS 1.83 METERS
DISTANCE FROM HEATER TO TENT SIDE WALL MUST
COMPLY WITH LOCAL CODES, AND BE ACCORDING
TO MANUFACTURER'S REQUIREMENTS.
SLOTS
DUCT ADAPTER
TABS
DUCT KIT
1. Mount the duct to the heater by inserting the tabs on
the duct adapter into the vertical slots on each side
of the blower outlet.
2. Push down on the duct adapter to secure the adapter
in place to the heater.
3. Extend the duct out to its full 3.6 meter length.
4. The tent material may then be draped around the
duct outlet, or an optional air diffuser (part number
21177) may be attached for air distribution purposes.
FIG. 6
DUCT INSTALLATION
13
FIG. 7