Outdoor Installation Kit
www.lbwhite.com
Outdoor Installation Kit • Guardian 60_100
4
FIG. 6
Assembling duct to heater
1. Fold up the tabs located on the take off
fl
ange.
2.
Guardian 60:
Position the
fl
ange so its two larger holes are located over the two screws used to mount
the heater’s control box. Drill six 1/8 in. holes at
fl
ange holes, top, bottom, and sides of
fl
ange. Secure the
fl
ange to the heater using quantity 6 item F screws. See Fig. 7. Tighten all securely.
FIG. 7
Guardian 100:
Remove the 4 blower outlet screws. Lay the
fl
ange over these holes and reinstall the four
screws. Also drill two 1/8 in. holes (one at top, one at bottom) at dimples and install quantity 2 item F screws.
See Fig. 8. Tighten all securely.
HORIZONTAL
BRACKET
VERTICAL
BRACKET
DIAGONAL BRACKET
(2 SETS WHEN DONE)
DRILL
LARGER FLANGE
HOLES
Summary of Contents for Guardian 60
