Service Parts,
Kits and Accessories
The parts identification guides on the following pages have
been designed to give a quick reference to component parts
used on hot surface ignition agricultural building heaters.
The guides identify components not only used on current
production, but also on equipment that is of earlier design.
To use the guides properly, you should know the model
numbers of the heater and its design sequence. This
information is identified on the dataplate. For earlier
heaters, the design sequence will be shown as the 6th digit
of the model number. For heaters manufactured more
recently, the dataplate will identify a configuration number.
The design sequence is the first digit of the configuration
number.
In many cases you will find components are common
between different designs of the model number. Parts lists
and schematics are shown on the following pages for the
respective heaters.
The parts guides also identify part numbers for the most
commonly requested components, wires, and hardware
items used on the heaters. If a wire, nut, or screw, etc. is not
identified, please contact the L. B. White Co. for parts
ordering information.
August 1999
9.1-1
1
Without C
Configuration N
Number
MODEL AW075EHP3
SERIAL NO.:
L. B. WHITE CO., INC. W6636 L.B. WHITE ROAD ONALASKA, WI 54650 608/783-5691
A
G S
DESI GN
CERTIFI ED
A
A
A
MERI C N
SSOC
I ATI
ON
MAXIMUM INPUT: 75,000 BTUH
TYPE FUEL: PROPANE VAPOR WITHDRAWAL
BURNER MANIFOLD PRESSURE 11 IN W.C. AT MAXIMUM INPUT
ELECTRICAL: 115 VOLTS A.C. 60 HZ SINGLE PHASE 1.4 AMPS
MIN. CLEARANCES FROM HEATER TO ADJACENT COMBUSTIBLE MATERIALS: REAR 1 FT SIDES 1 FT
TOP TO CEILING 1 FT BLOWER OUTLET 6 FT AND FUEL CONTAINER 6 FT
VENTILATION: 450 CFM OF AIR REQUIRED TO SUPPORT COMBUSTION.
MAXIMUM 13.5 INCHES W.C. AND MINIMUM 11.5 INCHES W.C. GAS SUPPLY PRESSURE
ACCEPTABLE AT INLET 0F HEATER FOR PURPOSE OF INPUT ADJUSTMENT.
POSITION HEATER AWAY FROM LIVESTOCK
AGRICULTURAL BUILDING HEATER
D
Daattaappllaattee C
Coom
mppaarriissoonn
With C
Configuration N
Number
MODEL AW060
CONFIGURATION NO. AHPD210000
SERIAL NO.:
L. B. WHITE CO., INC. W6636 L.B. WHITE ROAD ONALASKA, WI 54650 608/783-5691
A
G S
DESI GN
CERTIFI ED
A
A
A
MERI C N
SSOCIATI O
N
MAXIMUM INPUT: 60,000 BTUH
TYPE FUEL: PROPANE VAPOR WITHDRAWAL
BURNER MANIFOLD PRESSURE 10.0 IN W.C. AT MAXIMUM INPUT
ELECTRICAL: 115 VOLTS A.C. 60 HZ SINGLE PHASE 1.5 AMPS
MIN. CLEARANCES FROM HEATER TO ADJACENT COMBUSTIBLE MATERIALS: REAR 1 FT SIDES 1 FT
TOP TO CEILING 1 FT BLOWER OUTLET 6 FT AND FUEL CONTAINER 6 FT
VENTILATION: 240 CFM OF AIR REQUIRED TO SUPPORT COMBUSTION.
MAXIMUM 13.5 INCHES W.C. AND MINIMUM 11.5 INCHES W.C. GAS SUPPLY PRESSURE
ACCEPTABLE AT INLET 0F HEATER FOR PURPOSE OF INPUT ADJUSTMENT.
POSITION HEATER AWAY FROM LIVESTOCK
AGRICULTURAL BUILDING HEATER
Design
Sequence
Design
Sequence
AHPD210000
Parts Identification Guide