background image

Congratulations!

You have purchased the finest torch available.

Your new L.B. White torch incorporates the benefits from the most experienced

manufacturer of heating products using state-of-the-art technology.

We, at L.B.White 

thank you

for your confidence in our products and welcome

any suggestions or comments you may have...call us, at 1-800-345-7200.

ATTENTION ALL USERS

This torch has been tested and evaluated by L.B.White Company Inc.as a direct

fired hand held torch intended for temporary use in industrial, farm, or

construction applications where strong, direct, localized heat is required.  If you

are considering using this torch for any applications other than its intended use,

then please contact your fuel gas supplier or L.B.White Co., Inc.

150-29473

MODEL

OUTPUT 

(Btuh)          

FUEL

161-D (Cast Head)

500,000

172-D (Steel Head)

Owner's Manual and Instructions

Hand Held Torches

View this manual online at www.lbwhite.com

Propane

Vapor

Withdrawal

SCAN THIS QR CODE

with your smartphone or 
visit http://goo.gl/nvneR
to view maintenance
videos for L.B.White heaters.*

*Requires an app like QR Droid for Android or 
QR Reader for iPhone.

Summary of Contents for 161-D













Reviews: