L-Acoustics P1 User Manual Download Page 35 | Manualshive

Page: 35 / 82

background image

Operation

Input AVB statuses

NOT CONNECTED

The Unit is not connected to any talker.
If unexpected, possible causes are:

• The attempted connection failed.
• An AVB controller requested a disconnection.

To resolve, connect an AVB controller and use it to connect a talker to the Unit.
If alternating with

TRYING PREVIOUS

: the unit is trying to automatically connect to the stream

that was connected before last standby/power off. This can be overridden by selecting a

different stream or by disconnecting from LA Network Manager.

WAITING

RESERVATION /

REQUESTING

TALKER

The AVB Listener of P1 has been told by an AVB Controller to connect to an AVB Talker and it is

now waiting for the conclusion of the bandwidth reservation from the AVB Talker.
If displayed for more than a few seconds:

• Check the network for a disconnected cable.
• Check that the talker is in working order (fully booted).

RESERVATION

ERROR

and error

code

The bandwidth reservation has failed.
It can also be temporarily displayed when a network cable is disconnected then reconnected.
If displayed for more than a few seconds, refer to the

List of AVB reservation errors

(p.77).

WAITING START

The bandwidth is reserved but the Unit has received a "stop streaming" command by the AVB

controller: Try disconnecting and reconnecting the stream.

WAITING DATA

Waiting for the talker to transmit the stream.
If displayed for more than a few seconds, possible causes are:

• Talker is physically disconnected or off: check the talker.
• A "stop streaming" command has been sent to the talker from a third-party AVB controller:

Try disconnecting and reconnecting the stream.

LOCKING

Locking on the received stream.
If displayed for more than a few seconds, check the number of hops in the network cabling.

READY

and the

sampling frequency

Waiting for media clock to set up.
If displayed for more than a few seconds, possible causes are:

• Non-Avnu certied devices on the network are disrupting the media clock synchronization:

preferably use Avnu-certied devices.

LOCKED

and the

sampling frequency

Processing audio stream data.

P1 user manual (EN) version 2.1

35

«
...
33
34
35
36
37
...
»

Summary of Contents for P1



















































































Reviews:

No comments

Related manuals for P1

DHI-NVR5224-24P-4KS2

Brand: Dahua Pages: 24

Brand: Acqiris Pages: 22

Brand: Alesis Pages: 61

Brand: hilscher Pages: 154

Brand: ebm-papst Pages: 11

Brand: YASKAWA Pages: 15

Brand: DAD Pages: 16

Brand: Addonics Technologies Pages: 1

Brand: Advantech Pages: 50

Brand: Lanner Pages: 59

OMB-DAQBOARD-500 Series

Brand: Omega Pages: 48

Airborne M2M ABDN-er-DP55 Series

Brand: B+B SmartWorx Pages: 120

Brand: DigiTech Pages: 28

Brand: Cypress Semiconductor Pages: 31

Brand: Zonet Pages: 1

Soundweb 9088ii DSP System

Brand: BSS Audio Pages: 2

Brand: Cutting Edge Pages: 92

Wisenet XRN-6410DB4

Brand: Hanwha Techwin Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands