LARAK_UM_EN_1.0
w w w . l - a c o u s t i c s . c o m
5
5
5
5
27.
Local regulations
Some countries require higher Ultimate Strength Safety Factors and specific rigging approvals. It is the
user responsibility to ensure that any overhead suspension of L-ACOUSTICS
®
systems has been made
in accordance with all applicable local regulations.
As a general rule, L-ACOUSTICS
®
recommends the use of safety steel at all times.
28.
Flying a rack assembly
Always ensure that nobody is standing underneath the rack assembly when it is being raised.
As the assembly is being raised, check each individual rack to make sure that it is securely fastened to
the component above. Never leave the system unattended during the installation process.
29.
Ground stacking a rack assembly
Do not ground stack the rack assembly on uneven ground or platform.
If the system is ground stacked on a structure, platform, or stage always check that this last can
support the total weight of the system.
Secure the system to the structure, platform, or stage using ratchet straps or any other applicable
device.
30.
Dynamic load
When a system is deployed in an open air environment, wind effect should be taken into account.
Wind can produce dynamic stress to the rigging components and suspension points. If the wind force
exceeds 6 bft (Beaufort scale) it is highly recommended to lower down and/or secure the rack
assembly.
31.
Manual
Keep this manual in a safe place during the product lifetime.
This manual forms an integral part of the product.
Reselling of the product is only possible if the user manual is available.
Any changes made to the product have to be written in this manual, particularly in the event of resale.
!
WARNING
!
WARNING
!
WARNING
!
WARNING
!
IMPORTANT
Summary of Contents for LA-RAK
Page 2: ......
