LARAK_UM_EN_1.0
w w w . l - a c o u s t i c s . c o m
27
27
27
27
6.6.2
Internal analog audio connection
An
XLR patch panel
located on the rear side of the LA-PANEL and a set of
six XLR cables
allow distributing up to
six different analog audio signals (see section 6.6.1) to the LA8 amplified controllers. As the possible internal audio
cabling schemes are numerous only two representative ones are shown in Figure 21:
a.
One audio signal routed from channel #1 to controller analog inputs. In this case both “LINK” connectors
are used to cascade the three LA8 input channels.
Note:
In this example only the A channel is physically linked on each LA8 as the A signal can further be
internally routed to all four output channels. Use the LA NETWORK MANAGER Matrix function as
described in the
“LA NETWORK MANAGER – User Manual”
.
b.
Six audio signals respectively routed from channels #1-6 to the six controller analog inputs. In this case only
the “INPUT” connectors are used.
Figure 21: Internal analog audio cabling for (a) 1 or (b) 6 input signals
Figure 22: LA8 and LA-PANEL analog patch panels (rear views)
LA-PANEL analog audio internal patch panel
LA8 analog audio patch panel
b.
XLR cables
a.
Summary of Contents for LA-RAK
Page 2: ......
