L-3 Communications Office STE, User Manual

Page: 99 / 312

STE User’s Manual TPA Functions
Rel. 2.6 4-7
Figure 4-7. TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE UPDATE MANAGEMENT
Menu
Press: Result:
MODIFY If a TPA Card is not inserted, advances display to INSERT TPA CRYPTO CARD menu
(not shown)
If a TPA Card is inserted, advances display to VALIDATING TPA CRYPTO CARD
(
Figure 4-8 ) then to the TERMINAL CONFIGURATION CONTROL menu ( Figure 4-9 )
VIEW For Users (not TPA). Advances display to TERMINAL CONFIGURATION CONTROL
menu (
Figure 4-9 )
SCROLL Advances display to TERMINAL AUDIT INFORMATION menu (Paragraph 5-1.1 )
BACK Returns display to TERMINAL MANAGEMENT menu ( Figure 4-5 )
Press MODIFY .
4. If the TPA Card is not inserted when MODIFY is pressed, you will be directed to insert the TPA
Card – Step 5. If the TPA Card is inserted, go to Step 6.
5. Carefully insert the card into the CRYPTO CARD SLOT . When the CARD INSERTED indicator
on the front panel lights the STE will process the card and the front panel will display the flashing
notification message shown in
Figure 4-8 .
Figure 4-8. VALIDATING TPA CRYPTO CARD Menu
6. When the validation completes, the display will present the TERMINAL CONFIGURATION
CONTROL menu ( Figure 4-9 ).
Figure 4-9. TERMINAL CONFIGURATION CONTROL Menu
Press: Result:
SELECT Advances display to INITIAL SECURE MODE: menu (Paragraph 4-5.1.1 )
SCROLL Advances display to SECURE ACCESS CONTROL SYSTEM menu (Paragraph 4-5.2 )
BACK Returns display to TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE
UPDATE MANAGEMENT menu (
Figure 4-7 )
Press SCROLL three times (steps through the SECURE ACCESS CONTROL SYSTEM and
SPEAKERPHONE CONTROL menus) .
TERMINAL PRIVILEGES, ASSOCIATION
MODIFY BACK VIEW
AND SOFTWARE UPDATE MANAGEMENT
SCROLL
VALIDATING TPA CRYPTO CARD
Please Stand by
TERMINAL CONFIGURATION CONTROL
SELECT BACK SCROLL