L-3 Communications Office STE, User Manual

Page: 127 / 312

STE User’s Manual TPA Functions
Rel. 2.6 4-35
Press: Result:
ASSOCIATION menu (Paragraph 4-5.4 )
BACK Returns display to TERMINAL PRIVILEGES, ASSOCIATION AND SOFTWARE
UPDATE MANAGEMENT menu (Paragraph
4-5 )
Press SELECT to make changes in either non-secure or secure speakerphone settings.
Press SCROLL if no changes are required or after change has been made.
The default setting in the NONSECURE SPEAKERPHONE: menu ( Figure 4-64 ) is disabled.
Figure 4-64. Non-secure Speakerphone Menu
Press: Result:
CHANGE Only presented to TPA. Toggles between ENABLED and DISABLED
SCROLL Advances display to SECURE SPEAKERPHONE: menu ( Figure 4-65 )
BACK Returns display to SPEAKERPHONE CONTROL menu ( Figure 4-63 )
Press SELECT to change setting.
Press SCROLL if no change is required or after change has been made.
The default setting in the SECURE SPEAKERPHONE: menu ( Figure 4-65 ) is disabled.
Figure 4-65. Secure Speakerphone Menu
Press: Result:
CHANGE Toggles between ENABLED and DISABLED
SCROLL Returns display to SPEAKERPHONE CONTROL: menu ( Figure 4-63 )
BACK Returns display to SPEAKERPHONE CONTROL menu ( Figure 4-63 )
Press CHANGE to change setting.
Press SCROLL if no change is required or after change has been made.
4-5.4 Remove Association by Number/Create a New Association
The REMOVE ASSOCIATION BY NUMBER / CREATE A NEW ASSOCIATION menu ( Figure 4-66 )
provides the TPA with the gateway to menus needed to remove and create User Card associations with
the STE. Refer to the terminal management hierarchy shown in Foldout 4 and the terminal privilege
defaults shown in
Table 4-1 .
NONSECURE SPEAKERPHONE: DISABLED
CHANGE BACK SCROLL
SECURE SPEAKERPHONE: DISABLED
CHANGE BACK SCROLL