57
When disconnecting propane containers, you must turn the ACME fitting
in a clockwise direction because left-hand threads are utilized. When
reconnecting, turn connections counterclockwise. Connections must be
tight, however DO NOT over-tighten.
Installing Propane Containers
KZ recreational vehicles are equipped with 20 or 30 pound propane
containers, depending on floor plan models.
Mounting and attaching instructions are listed below:
1. Thread the long rod into the base plate.
2. Set both bottles into place as shown.
3. Drop the double hook bracket over the rod and hook onto the
bottles.
4. Attach the wing-nut to the rod and tighten to hold the bottles to
the plate.
5. Attach the regulator with the vent down to the bracket.
6. Attach the main hose from the regulator to the manifold fitting in
the frame.
7. Attach two short pigtail hoses to the regulator and bottles at the
ACME fitting.
8. Test all propane connections for leakage.
A warning label has been located near the propane container. This label
read as follows:
A warning label has been placed near the propane container.
This label reads as follows:
DO NOT FILL CONTAINER(S) TO MORE THAN 80% OF
CAPACITY.
1.
Overfilling the propane container can result in
uncontrolled gas flow, which can cause fire or
explosion.
2.
A properly filled container will contain
approximately 80% of its volume as propane.
All pilot lights, appliances, and their igniters (see operating
instructions) shall be turned OFF before refueling of motor
fuel tanks and /or propane containers. FAILURE TO COMPLY
COULD RESULT IN DEATH OR SERIOUS INJURY.
Never smoke during the filling of propane tanks. Keep the
recreational vehicle away from immediate filling area when
possible or extinguish all gas pilots.