Multi-Image Splicing Processor
13
Step 7:
According to operation above, screen body has been divided into three
images with proportion of 1:2:1. Default display content of each image is S1. If
different signal sources should be designated for each image, click
of front
panel to enter into image switch interface. Select image by rotate knob and choose
signal by click of S1-S6 of front panel. For example, if signal of image 2 is S6, click
“WIN” to enter into image switch, then adjust rotate knob to image 2 (it’s selected if
padded) and finally click “S6” of front panel. After selecting each image, save final
data which is the same with step 4.
Up to now, program debugging is finished. If any display method is needed in
later stage, it’s just OK to call saved mode. There are two ways for mode call. When
mode number is not big, just click M1-M6 of front panel which are shortcut key for
mode call; when mode number is big (over 6), user mode call should be made. Click
“MENU” to enter into main menu interface, then select “User mode” and call needed
mode.
