Multi-Image Splicing Processor
20
2. Occupation of serial port. Two or more software windows are not allowed to be open
simultaneously.
3. Failure of serial port line connection or damage of the line.
4. Damage of COM drive of the board or serial port.
If suggestions above fail to solve your problems at last, please contact with our customer
service in time. We will assist you to solve your problems as soon as possible.
Q6: What are the possible reasons for network overtime with network splicing
processor?
A:
Possible reasons are as follows:
1. IP address of local connection is not in the same field with splicer.
2. Failure of network line or damage of the line.
3. Damage of network port of signal source.
If suggestions above fail to solve your problems at last, please contact with our customer
service in time. We will assist you to solve your problems as soon as possible.
