Full Color LED Video processor KS600 User Manual
VII. Equipment Debugging
Navigation mode -- finish setting in 4 steps
The navigation is applicable to most cases. It is simple to set up. Follow the prompts
to debug in steps and achieve the desired display effect. When the power is
connected, the processor automatically enters navigation mode (or click
to enter
navigation mode). Point the remote control to IR part and then click the switch to
take effect (subsequence is the same as button):
Click “OK” to enter “Large Screen Parameters Setup”:
“Large Screen Parameters” are the actual pixels of the LED screen, which are
1920*1080 by default.
Navigation mode
Welcome to use the navigation!
[OK]
Cancel
Tips: Press OK to enter the next step
Press ESC to return to the previous step
Turn the knob to change
Turn on
Large Screen Parameters Setup
Width 1920 Step
×1
Height 1080
Tips: Press OK to enter the next step
Step 1
