Beijing KYSTAR Technology Co.,LTD
21
4.5.1 Add display port
The left part of the figure above adds display ports and screens and sets properties.
If the expansion screen is connected when creating a new project, the display port
and screen will be automatically created, and only editing is required at this time.
The display ports here are all virtual ports, which must be set to the graphics card
output before they can be finally output.
The display size of the display port size, when it is associated with the output of the
graphics card, will automatically compress and fill the content according to the size of
the graphics card.
4.5.2 New and edit screen
On the left side of the figure above, the screen is newly created and the physical
properties are edited. Edit the display layout of the screen on the right.
The left side defines which display port and location through which the screen is
output, and is composed of position and physical size.
The right side defines where on the canvas the screen takes the picture, consisting
of position and display size.
Common methods of 3 screens:
1 full screen
3 split screen
1 main 2 vice
Three screens use one display port to output.
By adjusting the position, size, and rotation of the screen, the flexible use of the
