Do not immerse or expose the Gas Rice Cooker control panel to rain,
moisture or any liquid.
Keep out of reach from children or from persons with mental or physical
disabilities.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
HOW TO USE
GAS RICE COOKER SETUP INSTRUCTIONS
Remove all packaging materials from the Gas Rice Cooker.
Push gas hose up to the red marking on the inlet pipe.
Fasten hose into the inlet pipe by tightening hose clamp.
Open the main gas valve.
Turn Gas Rice Cooker to ON. (see Gas Rice Cooker Usage Instructions)
After the burner has been lighted, adjust the damper clockwise or
counter-clockwise until slightly rounded blue flames are obtained.
GAS RICE COOKER USAGE INSTRUCTIONS
Wash rice grains in a separate container.
Transfer rice into the inner pot. Always fill in pot with enough rice and
water reaching the MIN mark but not exceeding the MAX marking.
Put enough water into the pot to cover rice. Pour one cup of water for
every cup of rice – this however depends on the type of rice used and as
well as to personal preference when cooking.
Check that the flame monitoring hole of the outer frame is directly above
the main control panel of the unit.
Fit inner pot inside the outer frame of the Gas Rice Cooker. See to it that
the base of the inner pot is
dry and clean
. Put top cover into the inner
pot.
Check that the ignition (1), ignition gas supply, and cook (2) buttons are
in OFF (up) position.
3
4
