Kyoto Kagaku MW13, Instruction Manual

Page: 8 / 40

6
1
Normal
Swollen
Preparation
Setting of DAM
(Tongue Edema)
Tongue Edema
Syringe
connector
Tube from the model
Syringe
connector
Tube from the model
Rotate while pressing connector Rotate connector counter-clockwise
To adjust the condition of the swollen tongue, inject/extract air to/from the tongue by using
the attached syringe to change the size of the tongue.
The size of the tongue can be set in two levels: normal tongue and swollen tongue.
1. To set the tongue to normal condition, do not inject air.
2. To simulate the condition of swollen tongue, intake 20mL of air into the attached syringe and
then connect it to the flat tube located in the neck of the model. The syringe is provided with
a lock mechanism. Insert the tip of the syringe to the connector on the end of the tube and
then turn the syringe clockwise. After injecting the air into the tongue to simulate swollen
tongue condition, turn the syringe counter-clockwise to detach it from the tube.
3. To restore the tongue to the normal condition, connect an empty syringe to the tube by
using the procedure in the step 2 to extract the air in the tongue to restore the size of the
tongue to normal.
Connecting Detaching