Introduction
Manufacturer s note
’
DOs and DON’Ts
２
DOs and DONʼTs
DOs
DONʼTs
●
When the electric parts get warm or produce
smoke, immediately turn off the power and
unplug from the power source
For safety reasons, always maintain an appropriate space
around the circulation pump while running the system so as to
allow the operator to unplug the power supp
l
y in case of
system malfunction.
Risk of fire. Contact your distributor or the manufacturer for
repair.
●
Handle with care
The materials for the models are special compositions of soft
resin.
Please handle them with utmost care at all times.
The manikin skin may be cleaned with a wet cloth,
if necessary, using mildly soapy water or diluted detergent.
●
Storage
Store the simulator at room temperature, away from heat,
moisture and direct sunlight.
Storage under the temperature above 50 degrees C may
reduce the performance quality of the simulator.
Storage in a dark, cool space will help prevent the skin color
from fading.
●
Operate the system under the designated
circumstances
Power input: AC100V～2
4
0V plus or minus 10％, 50Hz/60Hz
Temperature range: between 0
degrees
C and 40
degrees
C
(no congelation)
Relative humidity; between 0％
to 80％ (no condensation)
*Connecting to power source outside of the designated
range
may lead to fire.
●
Safe disposition
To avoid shoｒt circuit, do not run the simulator set above a
power receptacle.
●
Handle the power plug and cord observing
following precautions
1.
Clean the head of the plug periodically.
2.
Plug in the plug to the outlet firmly to the end.
3.
Always hold the plug when unplugging. Do not pull the cable.
4.
Do not force to bend, twist the cable and avoid scratching
or cutting on it.
Failing to follow the above precautions can result in damage in
the plug and the cable, constituting risk of fire or shock.
●
Do not disassemble or open electric or
precision components
Do not open up or disassemble the housing for electric parts
or precision components.
Refrain from opening up any lids, caps or covers for such
area
s,
and never run the system while any of such covers are
open.
*Never disassembl
e
the electric components, power plug
and
cable as it may create a risk of fire, shock or injury.
Contact
your distributor or the manufacturer for repair.
●
Never wipe the product and components
with thinner or organic solv
e
nt
●
Ink marks on the soft surface wonʼt be
removable
Donʼt mark on the product and components with pen or
leave any printed materials in contact with their surface.
●
Do not
drop or give
shocks
The electric components are precision instruments.
Strong
shocks or continuous vibration may cause breakages of its
internal structure.
●
Do not run the system continuously over
2
hours
Take at least 30 minutes shutdown, turning off the power,
every 2 hours.
●
Do not wet the electric components
Do not pour or spill water or liquid detergent over the
electric components, power cable and power plug.
Running
the system while the electric components are wet may
create a shock hazard or a risk of fire.
●
Do not handle the power plug with wet hands
Risk of shock.
●
No fire
Do not put the product close to fire. It may lead to discolor-
ation or deformation of the product as well as short circuit,
creating a risk of fire.
The color of the tube or soft resin parts may change over time, but this has no effect on simulator's functionality.