Read through the manual before you begin, so you will have an overall idea of what to do.
Check all parts. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor.
Symbols used throughout this instruction manual comprise the following :
Do not overlook this
symbol!
Apply epoxy glue.
Drill holes with the specified
diameter (here: 2mm).
Cut off excess.
Apply instant glue
(CA glue, super glue).
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling
Assemble left and right sides
the same way.
Must be purchased separately!
Pay close attention here!
The pre-covered film on ARF kits may wrinkle due to
variations of temperature. Smooth out as explained
here.
with cover (cloth)
low setting
Use an iron covered with a cloth,
Start at low setting. Increase the set-
ting if necessary. If it is too high, you
may damage the film.
Align the center line of
main wing with aileron.
Secure aileron hinges with instant glue,
being careful not to glue the wing and
aileron together.
Main Wing
3
