◆
Button Names and Functions
Program
The connection settings displayed now will be saved on the chassis. As these settings will
overwrite the existing settings, saving the existing settings from the chassis is recommended.
Read
Saves the setting data from the chassis to the computer it is connected to. Please note that
saving data will overwrite any data that is displayed on the screen.
Reset
Returns all settings on the connected chassis back to the factory default settings. Remember
this when using this function.
*After clicking ‘Reset’ always click ‘Program’. Just clicking ‘Reset’ will not reflect the changes.
Load
Displays the data saved on the computer’s hard disk.
Save
Saves the setting data currently displayed on the screen to the computer’s hard disk.
This will not save any setting data onto the chassis.
You can only save one set of data on the chassis at a time. Keeping multiple sets of data
saved on the computer is recommended.
Exit
Closes the software program.
