KYORITSU KEW 3127, Instruction Manual

Page: 38 / 60

－ 35 －
7-2 How to save data
Follow the procedures below to save the measured data.
Pressing the ESC button (
), during operation, returns to the previous screen.
(1) Stand-by state
Data save in the MEMORY mode shall
be done after fi nishing a measurement.
(while the result is being displayed on
the LCD.)
(2) Press the MEMORY button.
(3) Select either MEMORY or LOGGING
with the UP/DOWN button ( ).
(4) Press the ENTER button.
When selecting When selecting LOGGING :
MEMORY :
(5) Saving completes and
back to stand-by state.
(5) Stand-by state
(6) Press the TEST button.
(7) Measurement and logging start.
Blink
“LOGGING”
mark appears