— 2 —
#
DANGER
● The instrument is to be used only in its intended applications or
conditions. Otherwise, safety functions equipped with the
instrument will not work, and instrument damage or serious personal
injury may occur. Verify proper operation on a known source before
use or taking action as a result of the indication of the instrument.
● This instrument is intended only for use in single phase operation at
230V +10% -15% AC phase to earth or for use in OLD-TT system
phase to neutral.
● When conducting tests do not touch any exposed metalwork
associated with the installation. Such metalwork may become live
for the duration of the test.
● When testing, always be sure to keep your fingers behind the safety
barriers on the test leads.
● Be sure to remove the test lead from the mains power supply
promptly after measurement. Do not leave the instrument connected
to the mains power supply for a long time.
#
WARNING
● The instrument is to be used only in its intended applications.
Understand and follow all the safety instructions contained in the
manual. Failure to follow the instructions may cause injury,
instrument damage and/or damage to equipment under test.
Kyoritsu is by no means liable for any damage resulting from the
instrument in contradiction to this cautionary note.
●
Never open the instrument case
- there are dangerous voltages
present. If a fault develops, return the instrument to your distributor
for inspection and repair.
● If the overheat symbol appears in the display (
) disconnect the
instrument from the mains supply and allow to cool down.
● If abnormal conditions of any sort are noted (such as a faulty
display, unexpected readings, broken case, cracked test leads, etc)
do not use the tester and return it to your distributor for repair.
● Never attempt to use the instrument if the instrument or your hand
is wet.
Summary of Contents for 4118A
Page 23: ......