Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 45

Page: 45 / 189

3-14

Sending Faxes > Login/Logout

Logging in when Job Accounting has been Enabled

When job accounting has been enabled, you need to enter an Account ID when using the machine.

Login

In the account ID entry screen, enter the account ID using the numeric keys and select [

]

key.

Logout

When the operations are complete, select the [

Authentication/Logout

] key to return to the

account ID entry screen.

NOTE

• If you entered a wrong character, select the [

Clear

] key and enter the account ID again.

• If the entered account ID does not match the registered ID, a warning beep will sound and

• By selecting [

Counter

], you can refer to the number of pages printed and the number of

pages scanned.

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands

Kyocera Triumph-Adler P-C2155w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands