Kyocera Tomo S2410, User Giude

Page: 63 / 88

User Guide 63
• Vibe Then Ring vibrates for the first ten
seconds and then rings for the remainder of
the incoming call alert.
• Lights Only lights up for the duration of
the incoming call or other alerts.
You can also press and hold the # Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
From Volume , you can modify the following
settings.
Set Ringer Volume
1. From Ringer Volume , scroll right or left to
set the ringer volume.
2. Press the OK key to save.
Set Speakerphone Volume
1. From Spkrphone Volume , scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
Set Earpiece Volume
1. From Earpiece Volume , scroll right or left
to set the earpiece volume.
2. Press the OK key to save.
Set Keypad Volume
1. From Key Volume , scroll right or left to set
the keypad volume.
2. Press the OK key to save.
Set Flip Sounds
1. From Flip Sounds , select Flip Open or
Flip Close .
2. Select a sound. (Scroll down the list to play
the sounds.)
Set Power On/Off Sounds
From Pwr On/Off , select Enabled to have
your phone play the sound when turned on.
Keypad
From Keypad , you can modify the following
settings.
Set Key Press Sounds
From Key Sounds , select Tone , Click , or Off
to set the sounds you hear when pressing the
keypad.
Set Key Tone Length
From Key Length , select Normal or Long to
set the length of the keypad tone.
82-K8272-1EN.book Page 63 Monday, October 5, 2009 1:26 PM