Kyocera TASKALFA, Operation Manual

Page: 91 / 252

FAX Operation (Advanced)
4-23
4
12
You can change the following settings.
• Number of Copies
• Enable time setting
• File name registration
13
Press [OK].
Use Rule for Specific RX
To register settings by each reception requirement, follow the steps below. Up to 100 requirements can be
registered.
1
Press the System Menu key.
2
Press [FAX], and then [Next] of RX/Forward Rules .
3
Press [Use Rule for Specific RX].
4
Press [Add].
5
Press [Change] of Rule Number .
6
Press [+] or [-] or use the numeric keys to enter the
requirement number. You can enter the
requirement number between 001 and 100.
7
Press [OK].
8
Press [Change] of Rule Name .
9
Enter the requirement name, and press [OK].
10
Press [Change] of Rule .
NOTE:
For details on above settings, refer to
Forwarding Detail Settings on page 4-29 .
FAX - RX/Forward Rules
Cancel OK
Print or forward the received file according to
rules.
Raise Priority
Priority
Add
Use Rule for
Specific RX
Off
Use Rule for
All RX
On Requirement Name
Delete Detail
FAX A
ID
1/1
Status
01
1
others
12/12/2011 10:10
NOTE:
For details on character entry, refer to
Character Entry Method on page 2 of the Appendix .
Up to 32 characters can be entered for the
requirement name.