Kyocera RYOBI AJP-800, Owner'S Operating Manual

Page: 4 / 16

3
Preparation
Before starting up your machine, we advise you to carefully
read through this instruction manual. Follow all instructions
to minimize the risk of injuries when using the machine.
Prior to operation
Before starting up your machine, please check it carefully for
any defects. If you find any, do not start up your machine and
contact your distributor.
Especially check:
The insulation of the electric cable should be faultless and
without any cracks. If the electric cable is damaged, it should
be replaced by our authorized distributor.
Mains power supply connection
The following should be observed when connecting the
machine to the electric installation:
• Check before operation that the local power supply is the
same as the specifications on the rating label.
• This machine is equipped with universal motor with double
insulation. It is not necessary to have earth connection.
• The electric installation shall be made by a certified
electrician.
• It is strongly recommended that the power supply to the
machine should include a residual current device (RCD).
• Product protection degree:IPX5
General safety regulations and accident
prevention
It is essential that you read the safety regulations and
operating instructions in their entirety and follow the
information contained therein in order to eliminate the
possibility of an accident or potentially dangerous situation
from occurring while working with the machine.
• The power plug must be plugged into a properly installed
socket. The power supply should include a residual
current device for max. 30 mA.
• Always check the device, the mains cable and the plug
before using the machine. Only operate the device when
it is in good working order and has not been damaged in
any way. Damaged parts must be immediately replaced
by a qualified electrician.
• Always pull the power plug out of the socket outlet before
doing any work on the machine, before changing the
nozzle and whenever it is not being used.
• Warning! Inadequate extension cords can be dangerous.
• If an extension cord is used, it shall be suitable for outdoor
use, and the connection has to be kept dry.
• Only use suitable extension cable when working outdoors.
Extension cable must have a minimum cross-section of
1.5 mm
2 .
• Warning! This device was developed to be used with
cleaning agents supplied or recommended by the
manufacturer. The use of any other cleaning agents or
chemicals can negatively affect the safety of the device.
• Cable connections should be kept dry and off the ground.
Always uncoil the extension cable completely to avoid
heat damage to the cable.
• Warning! Do not use the device when other persons or
animals are in the near vicinity unless they are wearing
appropriate protective clothing.
Carefully read and understand these instructions
before operating this high pressure washer.
Package Contents (Fig.1)
1. Main unit
2. Variable nozzle lance
3. Mid nozzle lance
4. Spray handle
5. Spray handle hose (5m)
6. Water connector
7. Hose joint
8. Nozzle cleaning pin
9. Foam nozzle
Technical data
Power rating input 800 W
Rated pressure 60 bar (6.0 MPa)
Allowable pressure 90 bar (9.0 MPa)
Rated flow 4.8 L / min
Max. inlet water pressure 1.0 MPa
Max. temperature: 40
℃
Adding water From a faucet
Weight 3.8 Kg
Sound pressure level
Uncertainty
LpA=76dB(A)
KPA=3dB
Sound power level LwA=92dB(A)
Vibration Value
aH=1.8m/s
2
Kah=1.5m/s
2
Name of Parts:
1. Main unit
2. Variable nozzle lance
3. Mid nozzle lance
4. Spray handle
5. Spray handle hose
6. Water connector
7. Hose joint
8. Nozzle cleaning pin
9. Foam nozzle
10. Water supply hose (option)
11. Hose clamp (option)
12. Main switch
13. Safety lock button
14. Trigger
15. Power cord
16. Filter
17. Water inlet
18. Release button