3M0
1-5-6
18. Replace or cleaning the forwarding, paper
feed and separation pulleys.
19. Install the separation pulley to the paper
feed unit.
20. Refit two springs to the separation pulley
unit.
21. Refit the stay to the paper feed unit.
22. Install the paper feed pulley to the paper
feed unit.
When installing the paper feed pulley, make
sure that the one-way clutch of both the pul-
ley and the gear is placed toward the rear
side of the machine.
23. Install the forwarding pulley to the forward-
ing pulley unit.
24. Refit the forwarding pulley unit to the paper
feed unit.
Align the curved portions of the front and
rear upper paper guides so that the curved
portions are positioned above the roller axis.
25. Tighten each screw of the paper feed unit
front and rear loosened in step 7.
26. Refit the lever to the paper feed unit.
Figure 1-5-11
27. Refit the paper feed unit to side feeder and
connect two connectors.
28. Refit the left cover to side feeder.
Hook the projections of the left cover on the
guide of the paper feed unit and then refit
the cover with four screws.
29. Open the top cover and refit two straps to
paper feed unit.
Figure 1-5-12
Forwarding
pulley shaft
Forwarding
pulley unit
Upper paper
feed guide
Upper paper
feed guide
Left cover
Projections
Guide
Summary of Contents for PF-660
