Kyocera PF-430, Service Manual

Page: 26 / 38

5H2
1-4-4
(3) Remove the drive unit and main PWB
1. Remove the four screws.
2. Pull the upper cover rear ends (1).
3. While pulling out the cassette size switch
(2), and then remove the upper cover.
Figure 1-4-4
4. Remove the two connectors.
5. Remove the three screws and then remove
the motor bracket (drive unit).
Figure 1-4-5
Screw
Screw
Screw
Cassette size
switch
Screw
Upper cover
���
���
���
Motor bracket
(Drive unit)
Screw
Connector
Connector
Screw
Screw