THANK YOU FOR BUYING OUR PRODUCT.
To ensure your safety and satisfaction, carefully read
through this OWNER’S MANUAL before using the product.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term ″power tool″ in the warnings refers to your mains-op
-
erated (corded) power tool or battery-operated (cordless) power
tool.
1) Work area safety
a) Keep work area clean and well lit
. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while oper-
ating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool.
Carry-
ing power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools
are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tools operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
DRILL SAFETY WARNINGS
1.
Wear ear protectors when impact drilling.
Exposure to
noise can cause hearing loss.
2.
Use auxiliary handle(s) if supplied with the tool.
Loss of
control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
Cutting ac-
cessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an
electric shock.
4. Make sure drill bit is securely mounted. An incorrectly mount-
ed bit is extremely dangerous since it can fly off or break dur
-
ing drilling.
5. Do not wear cloth gloves or a necktie since they could be-
come caught in a rotating bit.
6. Never touch the chuck or metal body parts when drilling
walls, floors, or other surfaces covering electrical wiring.
Hold the drill only by the plastic handle to prevent electric
shock.
7. While operating the workpiece must be held with the vise or
the clamp etc. securely, for preventing to move it by the drill
rotation.
INSTRUCTIONS FOR SAFE HANDLING
1. Make sure that the tool is only connected to the voltage
marked on the name plate.
2. Never use the tool if its cover or any bolts are missing. If the
cover or bolts have been removed, replace them prior to
use. Maintain all parts in good working order.
3. Always secure tools when working in elevated positions.
4. Never touch the blade, drill bit, grinding wheel or other mov-
ing parts during use.
5. Never start a tool when its rotating component is in contact
with the workpiece.
6. Never lay a tool down before its moving parts have come to
a complete stop.
7.
ACCESSORIES :
The use of accessories or attachments
other than those recommended in these instructions might
present a hazard.
8.
REPLACEMENT PARTS :
When servicing use only identi-
cal replacement parts.
DESCRIPTION
1. Drill chuck
2. Switch
3. Lock button
4. Reversing lever
5. Impact shifting knob
6. Adjustment stopper
7. Aux. handle
8. Chuck key
9. Drill bit
SPECIFICATIONS
Chuck capacity
13 mm (1/2”)
Drilling capacity in wood
25 mm (1”)
in steel
13 mm (1/2”)
in masonry
19 mm (3/4”)
Input
710 W
No load speed
0 - 2,600 min
-1
Blows per minute
0 - 46,800 min
-1
Overall length
299 mm (11-3/4”)
Net weight
1.75 kg (3.9 lbs.)
STANDARD ACCESSORIES
Aux. handle, Adjustment stopper, Chuck key, Carring case
APPLICATIONS
(Use only for the purposes listed below.)
1. Drilling wood, metal and resin boards.
2. Drilling concrete (impact drill only).
MOUNTING OF BIT(Fig. 1)
When mounting the drill bit (9), insert the bit into chuck (1) as
far as it will go and tighten securely using the chuck key (8) pro-
vided. There are three holes into which the chuck key should be
inserted. Tighten each one equally in turn.
The bit can be removed by following the above method in re-
verse.
SWITCH(Fig. 2)
This tool starts and stops by depressing and releasing the
switch(2).
The speed can be adjusted from 0 through 2,600 min.
-1
by regu-
lating the trigger-squeezing force.
For continuous operation, press the lock button(3) while switch
is depressed. Depress again to release the lock.
CHANGING DIRECTION(Fig. 2)
To reverse the direction of rotation, stop the drill by releasing the
trigger and push the reversing lever (4) to the right or left.
When the reversing switch is in the position marked “F”, the
direction of rotation will be clockwise when viewed from the han-
dle end of the drill. When the reversing switch is in the position
marked “R” , the direction of rotation will be counterclockwise.
OPERATION OF PERCUSSION GEAR(Fig. 3)
An impact shifting knob (5) has been provided on top of the gear
case.
DRILLING -
Shift the impact knob to the symbol indicating
“ ” for rotation without impact action.
IMPACT MODE -
Shift the impact knob to the symbol indicating
“ ” for impact drilling.
OPERATING(Fig. 4)
NEVER COVER AIR VENTS SINCE THEY MUST ALWAYS BE
OPEN FOR PROPER MOTOR COOLING.
DRILLING IN WOOD
To prevent ugly splits around the drillhole on the reverse side
of the workpiece, place a scrap piece of lumber beneath the
material to be drilled.
DRILLING IN METAL
Metals such as steel brass, aluminum sheets, stainless steel,
and pipe may also be drilled. Mark the point to be drilled with a
nail or a punch.
DRILLING IN CONCRETE
Rock and masonry are generally drilled in the impact mode.
When drilling delicate materials such as wall tiles, it is essen-
tial to start with ordinary drilling and once the tile is pierced, to
continue with impact drilling.
In deep boreholes the drill bit should be pulled out occasion-
ally in order to remove the dust and chips from the hole.
AUX. HANDLE AND ADJUSTMENT STOPPER
Install the aux. handle (7) on the head of the housing and insert
the adjustment stopper (6) in the hole provided.
The aux. handle can swivel 360° for the most comfortable posi-
tion and easiest operation.
The stopper helps keep an accurate depth when drilling holes.
MAINTENANCE
After use, check the tool to make sure that it is in top condition.
It is recommended that you take this tool to an Authorised
Service Centre for a thorough cleaning and lubrication at least
once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS
IN MOTION.
ALWAYS DISCONNECT THE POWER CORD FROM THE
RECEPTACLE BEFORE CHANGING REMOVABLE OR
EXPENDABLE PARTS (BLADE, BIT, SANDING PAPER
ETC.), LUBRICATING OR WORKING ON THE UNIT.
WARNING!
To ensure safety and reliability, all repairs should be
performed by an AUTHORISED SERVICE CENTRE or other
QUALIFIED SERVICE ORGANISATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
“
WARNING
Always wear eye protection ”
“
WARNING
To reduce the risk of injury, user must read
instruction manual ”
“
Class II construction tool in which protection against elec-
tric shock does not rely on basic insulation only, but in
which additional safety precaution, such as double insula-
tion or reinforced insulation, are provided.”
1
1
2
2
3
4
3
5
6
5
3
2
4
7
1
8
9
4
