FAQs PA2000w
13
6.
Configure the settings.
1
Select
“Do not use WPS”
.
2
Press
next.
3
Select
an access point you want to
connect the device, and then click
Next.
4
Enter
the pre-shared key, and then
click
Next.
5
Select
the check boxes of functions you
want to use with Wireless Network
connection, and click Finish.
The network between this machine and the
computer is configured.
Note:
Event if show “Setup Complete”, If you
have the problems communicating with the
access point, please check that access point
information you set is correct. To reconfigure
the settings, uninstall the drivers and utilizes,
and reinstall them again.
