User Guide
13
The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent
accidental key presses.
1.
Camera lens.
2.
Volume
key raises or lowers ringer volume.
3.
Camera
key activates Camera mode. To activate camera mode,
press and hold the
Camera
key.
4.
External screen displays time, caller ID, signal, and battery strength.
5.
Lightpipe LED.
6.
Jack for micro USB cable (sold separately).
7.
Jack for a hands-free headset (sold separately).
Warning:
Inserting an accessory into the incorrect jack will
damage the phone.
Lightpipe LED Behavior
Your phone’s light pipe LED displays different patterns depending upon the alert. You can disable the light
pipe LED, see “Set Light Pipe Behavior” on page 54.
Note:
Incoming emergency calls always activate the LED, even if you have disabled it.
New message
One flash. If you do not respond, your phone will flash again to remind you.
Incoming call
Heartbeat pulse. It will continue until you answer the phone or miss the call.
Missed call
One flash. If you do not respond, your phone will flash again to remind you.
In call
Wave pulse. It will continue until the call ends.
Alarm
Three flashes. It will continue until you respond to the alert.
Scheduler
Three flashes. It will continue until you respond to the alert.
Bluetooth
One flash. It will continue until you respond to Bluetooth request.
Low battery
One flash. It will continue until you charge the phone.
Charging
Wave pulse. Displays when the phone is being charged.