9
2. NetWare Configuration.
ê
Select
Setup NetWare
in the Protocols column.
ê
Enter the
Print Server Name
,
Preferred NDS Context
, and
Print Server
Password
(if a password was defined) exactly as they were entered in
NWAdmin. Note: Entries are not case sensitive (except the sysadm pass-
word). Preferred Bindery File Server and Preferred NDS Tree should remain
blank unless Bindery mode is used or if the network includes multiple NDS
trees.
ê
If not using Bindery emulation, click the
Disable Bindery
box.
ê
Type the password,
sysadm
, in the appropriate box and click
Accept
Settings
. After a few seconds the screen should report that the update was
successful. Click the Back Arrow icon twice to return to the 3000E Configura-
tion page.
ê
The changes made to the 3000E do not take effect until the unit is reset. Click
on
Reset
in the System column, then click on the
Reset Unit
button. After a
few seconds the screen should report that the unit was reset.
3. Confirm Successful Configuration.
ê
Reconnect to the 3000E. After the Reset, the program advises waiting 2
minutes before reconnecting, but the 3000E may be available sooner.
ê
At the 3000E Configuration page, select
Unit Status
in the System column.
ê
Scroll down to display the NetWare status. The Queue Status should be
Attached
.
ê
If the Queue Status is not
Attached
, please verify that the entries for Print
Server Name, Preferred NDS Context, and Print Server Password match those
defined in NWAdmin or refer to the troubleshooting section in the Users
Manual.
