Kyocera FS-1920 Ecosys, Installation Manual

Page: 29 / 36

27
4 Push the center as shown in the figure to make space for
the developer unit.
5
Put the developer unit into that space.
To reinstall the developer unit into the printer, use the reverse procedure of the above.
E
NERGY
S
TAR
®
As an E
NERGY
S
TAR
Partner, we have determined that this product meets the
E
NERGY
S
TAR
guidelines for energy efficiency.
The basic objective of the E
NERGY
S
TAR
Program is to reduce environmental pol-
lution by encouraging the manufacture and sale of equipment that uses energy
more efficiently.
This printer is equipped with a sleep timer function that conforms with the stan-
dards of the E
NERGY
S
TAR
Program. This function makes it possible to reduce
the amount of electrical power consumed by the printer. For maximum power
savings, turn off the printer’s power supply when not using the printer for
extended periods of time.
For details on the sleep timer function and printer power consumption, refer to
the CD-ROM instruction manual provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep timer
function:
( ): E
NERGY
S
TAR
program guideline
Group for Energy Efficient Appliances (GEEA)
The goal of GEEA is efficient use of energy. This product has a high-efficiency
profile and meets the criteria for receiving the GEEA-Label.
Initial sleep mode setting Power consumption in sleep mode
15 minutes (30 minutes) 5.6 W (30 W) [U.S.A. / Canada]
5.3 W (30 W) [European countries]
Initial sleep mode setting Power Consumption
Power off
Sleep mode
15 minutes (30 minutes) 0 W (1 W) 5.6 W (30 W)
[U.S.A. / Canada]
5.3 W (30 W)
[European countries]
( ): GEEA criteria
Developer Unit
FS-1920IG.book 27 ページ ２００４年１月１５日 木曜日 午前１０時２１分