Kyocera Finecam - Digital Camera - 4.0 Megapixel Instruction Manual Download Page 37

Page: 37 / 134

2-13

sic O

per
at

ions

• If you are using Windows 98 or Windows 98SE, install the USB drivers before connecting

the USB cable. (

p.2-12)

• If you are using Windows Me, Windows 2000 or Windows XP, no driver installation is

needed. Connect the USB cable without installing the drivers.

• To view images on your PC, you must have image-viewing software already installed. (To

play movies, QuickTime 4.1 or later must be installed.)

• To view movies that have a large number of pixels or a high frame rate, first copy the

movie to your PC and then play the copy of the movie. If you use your PC to play back a

movie that is stored on a memory card loaded in the camera, the data transfer rate may be

too slow for the movie to play smoothly.

• You cannot check images on your PC unless there is a memory card in the camera.

Viewing images on a Windows PC

Load the memory card into the

camera. (

p.1-3)

Connect the AC adapter to the

camera.

Connect the camera to your PC

using the dedicated USB cable and

then start up the PC.

• Check the size of the USB connectors. The small

connector plugs into the camera and the large

connector plugs into the USB port on your PC.

Summary of Contents for Finecam - Digital Camera - 4.0 Megapixel







































































































































Search results

Summary of Contents for Finecam - Digital Camera - 4.0 Megapixel

Reviews:

Related manuals for Finecam - Digital Camera - 4.0 Megapixel

Brands by name

Popular brands

Kyocera Finecam - Digital Camera - 4.0 Megapixel, Instruction Manual

Search results

Summary of Contents for Finecam - Digital Camera - 4.0 Megapixel

Reviews:

Related manuals for Finecam - Digital Camera - 4.0 Megapixel

Brands by name

Popular brands