Kyocera Finecam - Digital Camera - 4.0 Megapixel Instruction Manual Download Page 21

Page: 21 / 134

1-5

Ca
mera Pre

parat

ions

• When the card access LED is flashing, images are being recorded onto the memory card.

Do not open the card/battery cover or remove the memory card while the LED is flashing

as this could cause data corruption or, in some cases, camera damage.

• Check that a memory card is loaded in the camera before switching the camera on.

• While the camera is switched on, pressing the POWER button

switches the camera off.

Push the memory card in gently

with your fingertip.

If you push the memory card in slightly, it pops

back out and you can then pull it out completely.

Close the card/battery cover.

Close the cover and slide it in the opposite

direction to the arrow (

) to lock it.

Switching the Camera On

Press the POWER button

The startup screen is displayed for a few seconds and

then the respective mode screen appears.

Summary of Contents for Finecam - Digital Camera - 4.0 Megapixel







































































































































Search results

Summary of Contents for Finecam - Digital Camera - 4.0 Megapixel

Reviews:

Related manuals for Finecam - Digital Camera - 4.0 Megapixel

Brands by name

Popular brands

Kyocera Finecam - Digital Camera - 4.0 Megapixel, Instruction Manual

Search results

Summary of Contents for Finecam - Digital Camera - 4.0 Megapixel

Reviews:

Related manuals for Finecam - Digital Camera - 4.0 Megapixel

Brands by name

Popular brands