Kyocera ECOSYS P2035d, Service Manual

Page: 28 / 128

2PG/2PH
1-3-4
Service items Description
Code conversion
A B C D E F G H I J
0 1 2 3 4 5 6 7 8 9
No. Items Description
(1) Engine ROM information [Flash ROM version]
(2) Boot ROM information [Boot ROM version]
(3) Software jumper switch
information
(hexadecimal)
[First byte/Second byte
(displayed in OEM model
only)] First byte
bit 0 = 1: (Fixed)
bit 1 = 0: Overseas, 1: Domestic (Japan)
bit 2, 3 (Not used)
bit 4 = 0: Kyocera, 1: OEM
bit 5 = 0: For Europe, 1: For US
bit 6 = 0: Non MICR mode, 1: MICR mode
bit 7 (Not used)
Second byte: Displayed in OEM model only
(4) Total page -
(5) Toner install information -
(6) USB information 00: Not connected
01: Full-Speed
02: Hi-Speed
(7) Operation panel lock sta-
tus (displayed only when
locked) 01: Partial lock
02: Full lock
(8) NVRAM error (displayed
only when any error has
occurred) 01: ID error
02: Version error
03: Checksum error
04: NVRAM crush error
(9) Printable area setting /Top offset/Left offset/Page length/Page width
(10) Left offset for each paper
source /MP tray/Cassette1/Cassette 2/Cassette 3/Duplex
(1/600 inches unit)
(11) Top offset for each paper
source /MP tray/Cassette 2/Cassette 3/Duplex
(1/600 inches unit)
(12) Offset for rotation /Top offset/Left offset/
(1/600 inches unit)
(13) Optional paper feeder ver-
sion /Paper feeder 1/Paper feeder 2/
(14) Calibration table setting Setting value (FRPO I4), Hexadecimal
(15) Resolution Current value of bit-per-pixel
(16) Copy quantity -
(17) Installed device/function
information bit0: HDD
bit1: Optional ROM
bit2: Memory card
bit3: USB memory
bit4: HDD security
(18) Operation panel message
language PMSG command setting (decimal)
(19) Current temperature
0 to 50

C/32 to 122

F (in 1

C/1.8

F increment, “-” = Temperature sensor
is abnormal.)