Kyocera ECOSYS M6530cdn, Operation Manual, Page: 49 / 186

3-16
Sending Faxes > Fax transmission functions
Fax transmission functions
To configure the settings for functions, select the [ Function Menu ] key.
Operation Method (page 2-5)
1
Displays the function menu.
2
Selects the item displayed or changes
the numeric value.
3
Confirms the selected setting.
4
Cancels the current menu setting to
return to the menu one level higher.
5
Switches between on-hook and off-
hook when manually sending a FAX.
Key Function Description
Reference
page
Quiet Mode Lower print and scan speed for quiet processing. Select
this mode when the running noise is uncomfortable. 3-17
Original Size Specify the original size to be scanned. 3-17
Original Image Select original image type. 3-18
FAX Resolution Set the resolution at which to scan originals. 3-18
Orig.Orientation Select the orientation of the original document top edge
to scan correct direction. 3-17
Continuous Scan Scan a large number of originals separately and then
produce as one job. 3-19
File Name Entry Adds a file name. 3-24
JobFinish Notice Send notice by e-mail when a job is complete. 3-24
FAX Delayed TX Specify a time for transmission. 3-21
FAX Direct TX Connect to the destination first and then scan the
original. 3-19
FAX RX Polling This function allows you to start automatic transmission
of a document saved in the sending machine by dialing
from the receiving machine. 5-15
FAX TX Report Print transmission results after transmission. 3-24
Density Adjust density. 3-18
Duplex Automatically scan 2-sided originals. 3-17
Key Function Description
Reference
page
Manual Send This method allows you to send originals by pressing
the [
Start ] key after confirming that the telephone line
has connected to the receiving system.
3-20
NOTE
For the procedure for transmitting FAX, refer to the following:
Basic transmission procedure (page 3-2)
2
3
4
1
5