Kyocera ECOSYS FS-6950DN, Service Manual

Page: 87 / 128

2F7-2
1-5-25
19. Remove the one connector.
20. Remove the two screws (A) and then
remove the HV plate.
21. Remove the two screws (B) and then
remove the engine R ground plate, engine L
ground plate and shield plate.
22. Check or replace the engine PWB and refit
all the removed parts.
To replace the engine PWB, remove the
EEPROM from the old engine PWB and
mount it to the new engine PWB.
Figure 1-5-35
Connector
E n g ine P WB
Shield plate
HV plate
Screw (A)
Screw (A)
Screw ( B )
Screw ( B )
EE P RO M
E n g ine L
g roundin g plate
E n g ine R
g roundin g plate