Kyocera ECOSYS FS-6950DN, Service Manual

Page: 36 / 128

2F7-2
1-3-6
Service items Description
No. Items Description
Paper source position counter /Duplex
Unit life counter /Drum unit
Maintenance kit life counter -
Unit version /Paper feeder 1/Paper feeder 2/Paper feeder 3/Paper feeder 4/
Unit EEPROM error bit0: Paper feeder 1
bit1: Paper feeder 2
bit2: Paper feeder 3
bit3: Duplex
bit4 to 6: Reserved
bit7: Drum unit
Drum ID -
Serial interface information RS2: RS-232C
RS4: RS-422A
Drum sensitivity information -
Calibration table settings Setting value (FRPO I4), Hexadecimal
Optional paper feeder/stacker
information 1st 2 bytes
bit0: MP tray
bit1: Paper cassette 1
bit2 to 5: Paper feeder 1 to 4
bit6: Reserved
bit7: Duplex
bit8: Reserved
bit9: Reserved
bit10 to 15: Reserved 2nd 2 bytes
bit0: Face up
bit1: Face down
bit2: Reserved
bit3: Reserved
bit4 to 15: Reserved
Operation panel message lan-
guage PMSG command setting (decimal)
Current temperature
0 to 50
°
C/32 to 122
°
F (in 1
°
C/1.8
°
F increment, “-” = Temperature/
humidity sensor is abnormal.)
Current humidity 25 to 90% RH (in 1% increment)
Absolute humidity
g/m
3
Number of rebooting for verti-
cal distortion check -
MAC address -
Fixed asset number (maximum 16 characters)
Media type attributes Media type setting value from 1 to 28 (paper weight)
(unused media type are always 0x00.)
Memory SPD information (slot
1) 2 to 6 bytes, 8 to 36 bytes, 94 to 95 bytes (total 32 bytes)
Drum status information -
Drum surface potential infor-
mation -
Drum sensitivity information -