Kyocera C5020N - FS Color LED Printer, Command Reference Manual

Page: 358 / 410

PRESCRIBE Command Reference
348
TATR —
apply Tray ATtributes
Format
TATR [
source
[,
thickness
,
print-density
]];
Parameters
source
paper source:
0 = MP tray
1 = main cassette
2 = second cassette
thickness
thickness of paper:
0 = normal (normal)
1 = thick
2 = thin
print-density
print density:
lighter (1) to darker (5), default is 3.
Function
The TATR command applies a paper source (MP tray or cassette) thickness of paper and
print density. This enables the printing system to optimize the electrical properties (such
as the fuser temperature and the transfer bias) so that the best print quality is achieved
with different thicknesses of paper.
The attributes are reset for a tray when thickness and print-density parameters are
omitted. All trays are reset when all three parameters are omitted.
Note
This command is relevant to the FS-1000 printer only.
File
To attribute the MP tray for thick paper and normal density:
!R! TATR 0, 1, 3; EXIT;
To reset the second paper cassette (option feeder) to the defaults:
!R! TATR 2; EXIT;
To reset all paper sources to the defaults:
!R! TATR; EXIT;