manualshive.com logo in svg

Kyocera C5020N - FS Color LED Printer, Command Reference Manual

Share
Download
Kyocera C5020N - FS Color LED Printer Command Reference Manual Download Page 170

PRESCRIBE Command Reference

160

MCRO — 

define MaCRO 

Format 

MCRO 

name

[ 

dummy-sign

[, 

comment

]]; 

Parameters 

name: 

character string starting with a letter 

dummy-sign: 

any character (default: % preceded by a space) 

comment: 

any character string 

Function 

The MCRO command assigns a name to the sequence of PRESCRIBE commands that 
follows, up to the ENDM (end macro) command. Thereafter, the entire sequence of 
commands can be executed by specifying the assigned name in a single CALL or AMCR 
(automatic macro) command. 

The 

name

 can be any length but only the first four characters count. The rest will be 

ignored. The distinction between upper and lowercase letters is also ignored. For 
example, the following macro names are all the same: 

ABCD

 

abcd

 

ABCDE

 

Abcdxyz 

The name must start with a letter, but the other characters can include digits and special 
symbols such as hyphens. For example, 

F-1

 and 

GRY2

 are valid macro names. 

dummy-sign

 (normally the percent sign) indicates dummy parameters in the body of the 

macro. Dummy parameters are given by writing the dummy sign followed by a number: 
%1 for the first dummy parameter, %2 for the second dummy parameter, and so on, up to 
a maximum of 19 dummy parameters. The same dummy parameter can be used any 
number of times. Values are assigned to dummy parameters when the macro is invoked 
by the CALL command. 

If a macro with the same name has already been defined, the new definition is ignored. 
To redefine a macro, you must first delete the old definition with the DELM (delete 
macro) or DAM (delete all macros) command, or by switching power off. 

See the 

Technical Reference

 manual for information on the limitations about the usage of 

macros.

The PCL5E command language, available in the mode 6 emulation, enables users to 
record HPGL/2 macros inside of HPGL/2 commands. 

Summary of Contents for C5020N - FS Color LED Printer



























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands