manualshive.com logo in svg

Kyocera Mita Vi7360, Instruction Handbook Manual

Share
Download
Kyocera Mita Vi7360 Instruction Handbook Manual Download Page 138

Special Original 8-7

Special Original

Text/Photo Enhance (continued)

1 Touch 

SPECIAL ORIGINAL

 on the Basic Screen to display the Special Original Screen.

2 Touch 

Text

, 

Photo

, or 

Increase Contrast

, as required.

3 Touch 

OK

 to return to the Basic Screen.

4 Select additional copying features, as desired.
5 Enter print quantity.
6 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen

glass.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.

Option: Press [CHECK] to view the selection, and make a Proof copy, if desired; then touch EXIT to return
to the Basic Screen. See p. 6-35 to p. 6-37.

7 Press [

START

].

After copying is completed, press [

AUTO RESET

] to release the mode and reset the

machine.

Original

Photo mode

Auto mode

Original

Text mode

Auto mode

Original

Increase contrast

 mode

Auto mode

Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy

Hard Copy

Hard Copy

Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy

Hard Copy

Hard Copy

Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy
Hard Copy

Hard Copy

Hard Copy

Summary of Contents for Vi7360





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands