manualshive.com logo in svg

Kyocera Mita Vi7360, Instruction Handbook Manual

Share
Download
Kyocera Mita Vi7360 Instruction Handbook Manual Download Page 120

Output Modes 7-15

Output Modes

Cover Sheet Feeder

The Cover Sheet Feeder is available as an option on the 2 Paper Tray/3 Paper Tray
finisher.
Load cover sheet paper into this device and use the sheets as front covers for copied
sets output to the Main tray; or use the sheets as booklet type covers for copied sets
output to the Booklet tray in the Folding or Stapling & Folding mode.

NOTES:
• Paper loaded into the cover sheet feeder cannot be copied.
• This function is incompatible with cover sheet mode (COVER WITH COPY SHEET and COVER WITH

BLANK SHEET) in Booklet and Thick paper mode in Sheet/Cover Insertion.

❒

Cover paper size: 11"x17"~5.5"x8.5" (13~110 lb (200g/m

2

 cover paper))

❒

Copy paper size: 11"x17"~5.5"x8.5" (20 lb paper recommended)

❒

Incompatible Basic Copying Conditions: Output to Secondary (sub) tray, Rotation Sort,
Rotation Group

❒

Incompatible Original Scanning Conditions: Mixed Original with APS

❒

Incompatible Applications: Cover Sheet mode in Booklet

Cover sheet

Copied set with

cover attached

Copied sets with cover 
attached in Folding or 
Stapling & Folding mode

Summary of Contents for Vi7360





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands