Kyocera Mita KM-F650 Page 135 Operation Manual Download

Page: 135 / 161

Troubleshooting

133

Information Codes

roblem

Solv

ing

412

No data from the transmitting side.

Check with the other party.

414

Polling password does not match.

Check the polling password.

415

Polling transmission error.

Check the polling password.

416/417
418/419

Received data has too many errors.

Check with the other party.

420/421 Machine goes to receiving mode, but receives no

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

422/427 Interface is incompatible.

Check with the other party.

430/434 Communication error occurred while receiving.

Check with the other party.

436/490 Received data has too many errors.

Check with the other party.

456

• Unit received a confidential document or was

requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the

confidential document.

2. Confidential Mailbox is full.
3. While printing received document.

• Unit was requested to relay a document.

1. Print a File List and check the contents.
2. Wait until unit finishes printing.

492/493

494

Communication error occurred while receiving.

Check with the other party.

495

Telephone line disconnected.

Check with the other party.

501/502 Communication error occurred using the internal V.34

Modem.

Check with the other party.

540/541
542/543

544

Communication error occurred while transmitting.

1. Reload the document and send again.
2. Check with the other party.

550

Telephone line disconnected.

Check with the other party.

552/553
554/555

Communication error occurred while receiving.

Check with the other party.

580

Sub-address transmission to a unit that has no Sub-
address function.

Check the remote station.

101

581

Sub-address Password transmission to a unit that has
no Password Sub-address function.

Check the remote station.

101

601

ADF Door was opened during ADF transmission.

Close the ADF Door and send again.

136

623

No document loaded on the ADF.

Reload the document and send again.

630

Redial was not successful due to a busy line.

Reload the document and send again.

631

During dialing, STOP was pressed.

Reload the document and send again.

634

Redial was not successful due to no response from
the called station or wrong number dialed.

Note: If busy tone was not detected, the machine will
only redial once.

Check the telephone number and send again.

638

Power failure occurred during the communication.

Check the power cord and plug.

800/816

825

Unit was requested to relay a document or
Confidential Communication but has no capability.

Check with the other party.

Info.

Code

Meaning

Action

page

Continued on the next page...

Summary of Contents for KM-F650


































































































































































Search results

Summary of Contents for KM-F650

Reviews:

Related manuals for KM-F650

Brands by name

Popular brands

Kyocera Mita KM-F650, Operation Manual

Search results

Summary of Contents for KM-F650

Reviews:

Related manuals for KM-F650

Brands by name

Popular brands