KYMCO Xciting 300i, Technical Training Materials Technical Training Materials

Page: 29 / 52

P.28/51
FUEL INJECTOR
REMOVAL
1. Disconnect the connector from the fuel injector.
2. Remove the bolt of the fuel injector.
3. Take out of the fuel pipe and fuel injector from the
Inlet pipe.
4. Remove the fuel injector from the fuel pipe
Connector Bolt
O-ring
Fuel Injector
Caution
Ensure the fuel pipe without any pressure, then remove
the fuel injector.
STEP 1 : Disconnect the fuel pump relay or fuel pump
connecter.
STEP 2: Turn the key to the ON position. Starting the
engine till the engine stop working.