MAINTENANCE
Coolant replacement
The coolant should be replaced by an authorized
KYMCO dealer.
▆
NOTE:
Always notice coolant level in the reserve tank.
Do not attempt to add coolant by removing the radiator cap.
Coolant recommendation
Use the proper type and amount of coolant. The
coolant must be in good condition and have the
proper ratio of anti-freeze and distilled water to
prevent freezing, overheating, and corrosion.
Use only high quality ethylene glycol anti-freeze
that contains corrosion protection inhibitors and
the formula is for aluminum alloy engines.
(See the label on the container)
A 50:50 solution of anti-freeze and distilled water
is require
d. It’s for most operating temperature
and also with good corrosion protection.
MAINTENANCE
CAUTION
∎
Use only low-mineral drinking water or
distilled water as a part of the anti-freeze
solution.
∎
Use tap-water will cause engine damage.
∎
Use a higher concentration of anti-freeze in
freezing weather and be replaced by the
KYMCO dealer. This higher concentration of
antifreeze should not exceed 60%. When
becoming warm, change the anti-freeze ratio
back to the standard ratio.
∎
A concentration of less than 40:60(40%
anti-freeze) will not provide proper corrosion
protection.
WARNING
Removing the radiator cap may have the
coolant sprayed out to suffer burns while the
engine is hot.
47
47
46