47
SECTION 4 - MAINTENANCE
Cleaning
Clean your motorcycle regularly to protect the surface
finishes and inspect for damage, wear, and oil, coolant or
brake fluid leakage.
Avoid cleaning products that are not specifically designed for
motorcycle, motorcycle, or automobile surfaces. Nonspecific
cleaners may contain harsh detergents or chemical solvents
that could damage the metal, paint, and plastic on your
motorcycle.
NOTE: If your motorcycle is still warm from recent
operation, give the engine and exhaust system time to
cool off before washing. Avoid the use of high pressure
water spray (typical in coin-operated car washes), as the
powerful spray can damage components on your
motorcycle.
Washing your motorcycle
1.
Rinse the motorcycle thoroughly with cool water to
remove any loose dirt.
2.
Clean the motorcycle with a sponge or soft cloth using
cool water. Avoid directing water at muffler outlets and
electrical parts.
3.
Clean the plastic parts using a cloth or sponge
dampened with a solution of mild detergent and water.
Rub the soiled area gently, rinsing it frequently with fresh
water. Take care to keep brake fluid or other chemical
solvents away from the motorcycle, as they will damage
the plastic and painted surfaces.
4.
After cleaning, rinse the motorcycle thoroughly with
plenty of clean water. This rinsing is required to remove
detergent residue which can corrode alloy parts.
5.
Dry the motorcycle and then start the engine, allowing it
to run for several minutes.
NOTE: The inside of the headlight lens may become
clouded immediately after washing the motorcycle.
Moisture condensation inside the headlight lens will
disappear gradually as it is heated by the headlight. After
washing, run the engine while keeping the headlight on
to dissipate any condensation.
