34
SECTION 4 - MAINTENANCE
3.
Remove the drain bolt to drain the oil.
4.
Replace the drain bolt. Tighten it to the specified torque.
Oil drain bolt torque:
18 lb-ft (25 N.m)
5.
Add the specified engine oil through the oil filler/dipstick
hole (amount is after draining).
Engine oil capacity:
0.9 L
Engine oil viscosity:
SAE 15W-40
Wipe the dipstick off with a clean cloth and reinstall it in its
hole, but do not thread it into the engine case. Insert the
dipstick until it touches the engine case.
NOTE: Park your motorcycle on the main stand, on level
ground.
6.
Remove the dipstick and visually inspect the oil level
on the stick. The engine oil level should be above the
"L" mark but not higher than the "F" mark. Add or
remove oil as required.
7.
Replace the oil filler/dipstick and tighten it securely.
8.
Start the engine and let it idle for 2 - 3 minutes
.
